Reyveron, l'expérience en mouvement

Positive drive belts

Securev+ conveyor belts

The + : The Securev belt which is made for positively driven conveyors.
The Securev+ belts are equipped with a Kevlar®* reinforced  polyurethane timing belt.

 

The 25T10 driven belt guarantees :

  • An optimum drive and guidance, with no belt slipping
  • A perfect tracking
  • A precise positioning of the conveyed products
  • No belt stretching
  • Managed bacterial risks

 

Timing belt :
25T10 TPU reinforced with Kevlar© *
Width: 25 mm, pitch: 10 mm**
courroie de transmission 25T10

Pulley :
Special Reveyron teeth cogs
Width : 28 mm
Outer diameter : 60 to 200 mm
In stainless steel, nylon or aluminium

Various fitting systems available on common shafts on round or square bores and different locking collars systems

 

Poulie
Belts :
Maximal belt width : 1000 mm
100% PU, homologated EC and FDA***, inerte and non-porous
Textile carcass in 100% polyester, multiply
Positive [HR] round pattern
Entrainement positif

 

White belt                  

blanc -    2PURB40/LHR: 2-ply white polyurethane belt, Thickness 2.3 mm, Bottom side PU [HR] (positive low adhesion pattern), rigid in weft
blanc -    2PURB100/LHR: 2-ply white polyurethane belt, Thickness 3.4 mm, Bottom side PU [HR] (positive low adhesion pattern), rigid in weft
blanc -    3PURB170/LHR: 3-ply white polyurethane belt, Thickness 5 mm, Bottom side PU [HR] (positive low adhesion pattern), extremely rigid in weft

 

Blue belt                       

bleu -    2PURX30/FHR: 2-ply blue polyurethane belt, Thickness 2.3 mm, Bottom side PU [HR] (positive low adhesion pattern), flexible in weft
bleu -    2PURX90/LHR: 2-ply blue polyurethane belt, Thickness 3.4 mm, Bottom side PU [HR] (positive low adhesion pattern), rigid in weft

 

 

In order to enhance the service life,  the level of protection and safety of REVPRO© conveyor belts, Reveyron fits these conveyor belts with sealed edges. This results in a belt resistant to all external attacks.
The fabric is completely coated in TPU, making the conveyor belt fully impermeable. It is therefore hermetically sealed and protected against all bacteriological or attacks.

 

All the conveyor belts are available with sealed edges [FPS], with a maximal width of 1000mm.

 

Schema 25T10

 

* : Kevlar® is a trademark of Dupont de Nemours

** : Before the welding on the belt, heat shrinking.

*** : Migration tests passed regarding  EC/1935/2004 regulation and 2002/72/EC directive.

PU & PVC belt range

Securev logo

Securev PU belts

The SECUREV belts meet your requirements in terms of hygiene and food Safety. The results : Managed bacteriological risks and a reinforced protection.

» more

NEED A CONTACT ?


Send us your message :