Manufacturing tolerances: 

Bobine2.png

Roll

Length
25 to 50 m: ± 0,5 m
50 to 100 m: ± 1 m
100 to 200 m: ± 1,5 m 
> 200 m: ± 2 m

Width
0 à 200 m: ± 1 mm

201 to 600 mm: ± 2 mm
601 to 1000 mm: ± 4 mm
1001 to 2000 mm: ± 6 mm
2001 to 3000 mm: ± 7 mm

Bobinette.png

Roll / Stock Piece "as is"

Length
0 to 10 m: ± 0,5 m
10 to 25 m: ± 1 m
25 to 50 m: ± 2 m 
>50 m: ± 3 m

Width
0 to 200 m: ± 1 mm

201 to 600 mm: ± 2 mm
601 to 1000 mm: ± 4 mm
1001 to 2000 mm: ± 6 mm
2001 to 3000 mm: ± 7 mm

BL.png

Open Belt

Length
0 to 1 m: ± 5 mm
1 to 3 m: ± 10 mm
3 to 7 m: ± 20 mm 
>7 m: ± 0,3 %

Width
0 to 200 m: ± 1 mm

201 to 600 mm: ± 2 mm
601 to 1000 mm: ± 4 mm
1001 to 2000 mm: ± 6 mm
2001 to 3000 mm: ± 7 mm

BA.png

Fabricated Belt

Length
0 to 1 m: for a width ≤ 0,5m: ± 15 mm, if width >0,5 m: ± 15 mm
1 à 3 m: for a width ≤ 0,5m: ± 25 mm, if width >0,5 m: ± 20 mm
3 à 7 m: for a width ≤ 0,5m: ± 35 mm, if width >0,5 m: ± 30 mm
>7 m :
± 0,5 %

Width
0 to 200 mm: ± 1 mm (with FPS [sealed edges]: +2/-3 mm)

201 to 600 mm: ± 2 mm (with FPS [sealed edges]: +2/-5 mm)
601 to 1000 mm: ± 4 mm (with FPS [sealed edges]: +2/-6 mm)
1001 to 2000 mm: ± 6 mm (with FPS [sealed edges]: +2/-8 mm)
2001 to 3000 mm: ± 7 mm

Maille.png

Mesh Belt

Length
0 to 1 m: ± 10 mm
3 to 7 m: ± 30 mm 
>7 m: ± 0,5 %

Width
0 to 200 mm: ± 2 mm

201 to 600 mm: ± 3 mm
601 to 1000 mm: ± 6 mm
1001 to 2000 mm: ± 8 mm
2001 to 3000 mm: ± 10 mm

Maille accesso.png

Fabricated Mesh Belt

Length
0 to 1 m : ± 10 mm
1 to 3 m : ± 20 mm
3 to 7 m : ± 40 mm 
>7 m : ± 0,6 %

Width
0 to 200 mm : ± 2 mm

201 to 600 mm: ± 4 mm
601 to 1000 mm: ± 8 mm
1001 to 2000 mm: ± 12 mm
2001 to 3000 mm: ± 14 mm

General Tolerances for Belts

Total thickness:  ± 0,1 mm par pli
Weight
: ± 10 %
Coefficient of friction on steel slider bed: ± 20 %

Breaking strength: -10 % / + 20 %
k1% tensile force : -10 % / + 20 %
Max. tensile force: -10 % / + 20 %

Accessories and Fabrication

Pitch: ± 2 mm (non-accumulative)
Perpendicularity: 2 mm for width
≤ 200 mm, 1 % for width >200 mm
Centring:
± 2 mm
Distance between axes: ± 2 mm non cumulable
Length: ± 2 mm
Height: ± 10 %
Splice symmetry and belt misalignment: 0,1 % de la longueur
Perforation diameter (except jointing area) : ± 0,5 mm for ⌀ ≤ 20 mm, ± 1 mm for ⌀ > 20 mm

Image Tolerances texte EN.png

 

Determining the adjustment range for belt tensioning

The adjustment range on the conveyor must be at least 1,5% of the total length of the belt. Hence,for a belt with a total length of 10 m, the tensioning system of the conveyor must at least have an adjustment range of 75 mm.

 

Determining the length of a belt

La longueur d'une bande doit être mesurée avec le système de tension sorti au 1/3. Pour passer la bande, il faudra rentrer les tendeurs entièrement. Il restera ensuite 2/3 de course de réglage pour tendre la bande.

Selezione del nastro

Questo Sito utilizza cookie di profilazione per realizzare delle statistiche. Se accedi ad un qualunque elemento sottostante di questo Sito o chiudi questo banner, acconsenti all’uso dei cookie. Se vuoi sapere di più, clicca qui. clicca qui

Accetta